DISCLAIMER: This kit may replace the front OEM turn signal lights with aftermarket DRL LED type lights which can be wired to operate as driving lights and/or turn signals. 6.) If you connect the Gray wire to the 12V source while the LED is on – the LED will Flash. – Each corresponding LED will light up AMBER 5.) If you disconnect the Yellow wire from the 12V source – LED will turn off after 20sec.
– LED will light up AMBER 4.) Connect the Brown or Green wire to the 12V source. – LED will light-up WHITE 3.) Connect the White wire to the positive battery terminal.
Rocket Bunny / Pandem V2 LED Light Kit White LED Daytime running lights with amber turn signals Imported from TRA Kyoto, Rocket Bunny For use with Rocket Bunny Version 2 Front Bumper on FR-S/BRZ, RX-7, 350Z, GT-R, S15 & NSXġ0 LED DRL Light Kit with a controller Basic Wiring Diagram Translation: Black (-) Ground Red (+) 12V Power Yellow 12V ACC White 12V Positive Headlight Gray 12V to Flash Blinkers Brown 12V Blinker Set A LED Green 12V Blinker Set B LED Product description: With ACC at ON position, the light will light up WHITE Corresponding LED will flash AMBER with the turn signal on With parking or headlights on, the LED will turn AMBER It will take roughly 20sec for the LED to turn off after the ACC is turned OFF * Flash Feature: if you connect the Gray wire to the positive terminal, the LED will flash WHITE and AMBER Input Voltage: DC 9V-24V Current Draw: 0.7A per unit Waterproof rating: IP66 * Make sure to check that all the LEDs light up before installation Detailed Wiring Instructions: 1.) Connect the main unit (control box) to the LED(s) 2.) Connect the Yellow wire to the Positive battery terminal and the Black wire to the Negative.
0 kommentar(er)
